|
これまでの主な業績
- 諸貫 信行, 包 闊, 自己整列微粒子の形状転写によるマイクロレンズアレイの製作とモールド変形を利用した非球面化の検討, 精密工学会誌, ;88, 2 (2022) pp.206-210
- Nobuyuki Moronuki, Takeshi Takada, Alexander Schotten, Dynamic contact
angle measurement on microscopic area and application to wettability characterization
of a single fiber, Langmuir, 2022, 38, 72−78.
- Daiki Kajita and Nobuyuki Moronuki, Reconfigurable Production Line Design Method for Human Workers – Robotic Cell Collaborated Line Considering Worker’s Attitude Toward Work, Int. J. of Automation TechnologyVol.15 No.6 (2021) pp.754-763.
- 諸貫信行, 中村修太郎, 濡れ性パターンによる水凝集の離散化と着霜抑制の試み, 精密工学会誌, Vol. 87, No. 11 (2021)
pp.889-893.
- 諸貫 信行, 関野 俊介, チタニアロッドアレイのパターン化水熱合成と水中での油滴除去機能面の作製, 日本機械学会論文集, Vol. 87,
No. 902 (2021).
- Nobuyuki Moronuki, Renato Serizawa, Micro-Structures Produced by Crystal
Growth from Located Nuclei and Their Transfer Aiming at Functional Surfaces,
Journal of Manufacturing and Materials Processing (2020) .
- Daiki Funakawa and Nobuyuki Moronuki, Fabrication of SiO2-ZnO Core-Shell
Urchin-Like Structure by Hydrothermal Method Using Self-Assembled Particles
as Nuclei and Application to UV-Activated Gas SensorsInt. J. of Automation
Technology, Vol.14, No.2 (2020), pp.184-189.
- 梶田 大毅,榎本 敦子,堤 大輔,諸貫 信行, 幾何学的拘束条件に基づくロボット組立動作自動計画技術(3D CAD データを用いた部品組立作業における始点,終点および経由点の算出),
日本機械学会論文集, Vol.85, No.875, 2019, 13 pages.
- Yasutoshi Umehara, Nobuyuki Moronuki, Nondestructive Inline Inspection
of Through-Silicon Vias based on X-ray Imaging and its Uncertainty Budget,
Int. J. of Automation Technology, Vol. 13, No. 2 (2019) pp. 289-300.
- 諸貫信行, 若松健太, セルロースナノファイバーによる単層整列微粒子の固定化とその付着力測定, 精密工学会誌, 85, 2(2019.2) pp.
197-201.
- 諸貫 信行, 森田 翔都, 垂直配向TiO2ナノロッドの水熱合成とその機能性評価,精密工学会誌, 85, 1(2019.1) pp. 74-78.
- 諸貫 信行, 大久保 裕司, 自己整列微粒子を核とした水熱合成による酸化亜鉛ウニ状マイクロ構造の作製とガスセンサへの応用, 精密工学会誌, 84,
3, (2018-3) pp. 267-271,
- Nguyen Phan, Nobuyuki Moronuki, Combination of silicon microstructures
and porous cellulose nanofiber structures to improve liquid-infused-type
self-cleaning function, Precision Engineering, 51 (2018) 638-646.
- 梅原康敏, 諸貫信行, ナノフォーカスX 線透過像を用いたボイド欠陥を含む銅めっき後のThrough-Silicon Via の非破壊インライン検査方法, エレクトロニクス実装学会誌, Vol. 20 No. 7(2017) pp.468-477
- Nguyen PHAN and Nobuyuki MORONUKI, Fabrication of high aspect ratio silicon
micro-/nano-pore arrays and surface modification aiming at long lifetime
liquid-infused-type self-cleaning function, JAMDSM, Vol.11, No.2 (2017)
DOI: 10.1299/jamdsm.2017jamdsm0013
- Nobuyuki Moronuki, Nguyen Phan, and Norito Keyaki, Fabrication of High Aspect Ratio Silicon Nanostructure with Sphere Lithography and Metal-Assisted Chemical Etching and its Wettability, Int. J. of Automation Technology, Vol.10, No.6 (2016-11) pp.971-976.
- Kenta Wakamatsu, Nobuyuki Moronuki, Fabrication of Stacked Layers of Fine Particle Assembly Aiming at Wavelength-Selective Reflection, Int. J. of Automation Technology, Vol.10, No.6 (2016-11) pp.964-970.
- 梅原康敏,諸貫信行,ナノフォーカスX線透過像を用いたThrough-Silicon Viaの三次元形状簡易推定法-推定原理と誤差評価-,精密工学会志,Vol.
82, No. 10 (2016) pp. 901-906, doi.org/10.2493/jjspe.82.901
- Nobuyuki Moronuki, Functional Texture Design and Texturing Processes, Int. J. of Automation Technology, Vol.10 No.1, 2016, pp.4-15.
- 諸貫 信行, パターン化材料配置による表面機能設計に関する検討, 日本機械学会論文集81, 832(2015) DOI:10.1299/transjsme.15-00275
- Yuji Okubo and Nobuyuki Moronuki, Self-assembly of fine particles along tool-mark produced by free-form cutting for improving biochemical analysis, 精密工学会誌Journal of the Japan Society for Precision Engineering, Vol.81, No.9 (2015)pp.857-861.
- Nobuyuki Moronuki, Hirokazu Tachi, Yashio Suzuki, Hydrophilic/hydrophobic surface pattern design for oil repellent function in water, Int. J. Nanomanufacturing, Vol. 11, Nos. 1/2, 2015, pp. 46-55.
- Manabu Nishio, Nobuyuki Moronuki, and Minoru Abasaki: Fabrication of Patterned Ag and Au Inverse Opal Structures Through Repeated Self-Assembly of Fine Particles, IJAT, 8, 5(2014-9) 755-760
- 西尾 学,諸貫 信行,微粒子整列技術の三次元曲面上への拡張,日本機械学会論文集,Vol.80, No.810, 2014-2, DOI: 10.1299/transjsme.2014mn0031
- 西尾 学,諸貫 信行,金子 新,親水・疎水パターンを設けた溝構造への選択的微粒子整列と微粒子整列開始条件のモデル化,精密工学会誌, Vol.80,
No. 2, 2014, pp.172-176.
- 諸貫 信行,高田 健一郎,張 文儒,微粒子のパターン化自己整列と転写を用いた粒子構造製作と研磨工具への適用検討,日本機械学会論文集C編, 79,
808(2013), pp.4564-4571.
- N. Moronuki and W. R. Zhang: Patterned self-assembly of fine particles
and its application to polishing tool, JAMDSM, JSME(2012)pp.792-799.
- Y. Tanaka, N. Keyaki, N. Moronuki, and A. Kaneko: Increase in the Area
of Structured Surface and its Effect on Sensitivity Improvement of Biochemical
Sensing, Key Engineering Materials Vol. 516 (2012) pp 160-165.
- M. Nishio, N. Moronuki, Y. Tanaka, A. Kaneko: Self-assembly of Functional
Particles on Optical Element for Sensitivity Improvement of Biochemical
Sensor, Key Engineering Materials Vol. 516 (2012) pp 60-65.
- N. Moronuki, M. Nishio, Y. Tanaka, Micro-/Nano-structuring based on self-assembly
of particles to improve surface functionality in biomedical applications,
Procedia Engineering, 19, 2011, pp. 276–281
- 金子 新,諸貫信行,微細構造化による安全安心な表面設計―手足に触れる人工物表面の摩擦制御と滑り防止―,精密工学会誌, 77, 11, 2011, pp.1044-1049.
- Nobuyuki Moronuki, Arata Kaneko, and Ken'ichiro Takada,Patterned Self-Assembly
of Fine Particles as a Proposal of Precisely Allocated Cutting-Edge Tool,
Int. J. of Automation Technology, Vol.5, No.3, 2011, pp.289-293.
- 諸貫信行編著,微細構造から考える表面機能,森北出版(2011)
- N. Moronuki and A. Kaneko, Safe and Comfort Design of Micro-Structured
Surfaces for Artifacts in Contact with Human, Key Engineering Materials
Vols. 447-448 (2010) pp 690-694.
- A. Kaneko, H. Kobayashi, N. Moronuki, Surface micro-structuring using polymer
elongation, Key Engineering Materials, Vols. 447-448 (2010) pp 685-689
- D. ARUGA, A. KANEKO and N. MORONUKI, Design of Quick-Dry Surface Using
Structured Surface, Journal of Advanced Mechanical Design, Systems, and
Manufacturing, JSME, Vol. 2 (2008), No. 4, pp.773-782.
- Y. Kanamori, A. Kaneko, N. Moronuki and T. Kubo, Self-Assembly of Fine
Particles on Patterned Wettability in Dip Coating and Its Scale Extension
with Contact Printing, Journal of Advanced Mechanical Design, Systems,
and Manufacturing, JSME, Vol. 2 (2008), No. 4, pp.783-791.
- A. Kakuta, Y. Furukawa and N. Moronuki, The Effect of Substrate Crystal
Orientations on Surface Properties of SiC Thin Layer Grown by MBE, Journal
of Advanced Mechanical Design, Systems, and Manufacturing, JSME, Vol. 2,
No. 4, 2008, pp. 824-832.
- T. Osada, A. Kaneko, N. Moronuki, and T. Kawaguchi, Design of structured surfaces for directional mobility of droplets, International Journal of Precision Engineering and Manufacturing, Vol. 9, No.3, 2008, pp.13-17.
- N. Moronuki, M. Kojima and A. Kakuta, Single-crystal SiC thin-film produced
by epitaxial growth and its application to micro-mechanical devices,Thin
Solid Films, 516, 30 June, 2008, pp. 5344-5348.
- H. Kobayashi, N. Moronuki, and A. Kaneko, Self-assembly of Fine Particles
Applied to the Production of Antireflective Surfaces, International Journal
of Precision Engineering and Manufacturing, Vol. 9, No.1, 2008, pp.25-29.
- 諸貫信行,微細加工と表面機能(編修委員長,分担執筆),リアライズAT,2007
- 諸貫信行,表面微細構造による濡れ性の制御,伝熱, 46, 194, 2007, pp.46-51.
- 諸貫信行,小木曽淳一,金子 新, 濡れ性パターンを用いた微粒子の自己整列(第1報),精密工学会誌,72, 9, 2006, pp.1113-1117.
- N. Moronuki, Y. Saito and A. Kaneko, Vibration micro-machining of low-melting-temperature
glass, Int. J. Manufacturing Technology and Management, 9, Nos.1/2, 2006,
pp18-33.
- 諸貫信行,超微細パターニング技術(分担執筆),第29章「濡れ性パターニングを用いた微粒子の自己整列」,サイエンス&テクノロジー社,2005.
- 諸貫信行,角田 陽,高岡勝則,単結晶SiC薄膜の製作と微小構造材料への適用,精密工学会誌,71, 9, 2005, pp.1146-1150.
- 金子 新,藤山孝太郎,角田 陽,諸貫信行,古川勇二,エピタキシャル成長における3次元島形成を利用したナノテクスチャ創成に関する研究,精密工学会誌,71, 6, 2005, pp.744-749.
- 諸貫信行,高山明典,金子 新,濡れ性制御のためのテクスチャ設計,日本機械学会論文集B編,70, 693, 2004, pp.1244-1249.
- A. Kakuta, N. Moronuki, Y. Furukawa, Surface Properties of SiC Layer Grown
by Molecular Beam Epitaxy (MBE) with Helicon Sputtering Molecular Beam
Source, JSME International Journal, Series C, Vol.47, No.1, 2004, pp.123-128.
- N. Moronuki, Design of Silicon-Monolithic Flexure Stage with Selective
Compliance, JSME International Journal, Series C, Vol.47, No.1, 2004, pp.111-116.
- 諸貫信行,佐藤昌明,微小片持ちはりのタッピングによる表面機械特性の推定と識別,精密工学会誌, 70, 3, 2004, pp.363-367.
- N. Moronuki, F. Yoshida, Y. Sato, and A. Kaneko, Abrasive Micromachining
with a Multi-Axes Vibration Tool, Key Engineering Materials, Vol.257-258,
2004, pp.447-452.
- 諸貫信行,大和 朗,テクスチャの 摩擦方向性を利用した微小しゅう動体の運動拘束,精密工学会誌69, 11, 2003, pp.1631-1635.
- N. Moronuki, Y. Furukawa, Frictional Properties of the Micro-Textured Surface
of Anisotropically Etched Silicon, Ann. CIRP, 52, 1, 2003, pp.471-474..
- 諸貫信行,内山賢治,接触する微小2平面間に作用する凝着力―寸法,雰囲気および表面濡れ性の影響―,精密工学会誌, 69, 4, 2003, pp.512-516.
- A. Kakuta, N. Moronuki, Y. Furukawa, Nano-Texturing of Surface by Constricting
Epitaxial Growth of Molecules, Annals of CIRP, 51, 1. 2002, pp.323-326.
- 佐々木智憲,楊 明,諸貫信行,古川勇二,低エネルギイオン支援によるスパッタ薄膜の高性能化,日本機械学会論文集A, 68, 666, 2002,
pp.307-312.
- 諸貫信行,内山賢治,菊地吉史,画像処理による微小物体の三次元運動計測,精密工学会誌,67,9,2001,pp.1502-1506.
- N. Moronuki, Y. Furukawa, An Analysis of Surface Properties of Hetero-Epitaxially
Grown SiC Surface on Si Substrate, Annals of CIRP, 49, 1, 2000, pp.447-450.
- N. Moronuki, Linear Motion Microsystem Fabricated on a Silicon Wafer, Int.
J. Japan Soc. Prec. Eng., 33, 2, 1999, pp.83-86.
- N. Moronuki, A. Kakuta, Y. Furukawa, Large Scale Single-Crystal and Extremely
Smooth SiC Surface Produced by Hetero-Epitaxial Growth and Its Applicability
to Optical Elements, Precision Science and Technology for Prefect Surfaces,
JSPE Pub. No.3, 1999, pp.273-278.
- A. Kakuta, H. Miyakoshi, N. Moronuki, Y. Furukawa, A Study on the SiC Hetero-Epitaxial
Growth Process on Silicon Substrate, Precision Science and Technology for
Prefect Surfaces, JSPE Pub. No.3, 1999, pp.279-284.
- N. Moronuki, Y. Furukawa, Microlinear Motion Bearing Produced by Anisotropic
Etching of Silicon, Annals of CIRP, 46, 1, 1997, pp.151-154.
- T. Aoki, Y. Furukawa, N. Moronuki, A Study on Controlling Algorithm to
Realize High-Speed & High-Accuracy Control Systems, Journal of Robotics
and Mechatronics, 9, 6, 1997, pp.446-454.
- 李 光煕,諸貫信行,エントロピー評価を用いた機械機能の組合せ設計,精密工学会誌,62,11,1996,pp.1562-1566.
- N. Moronuki, Y. Mikami, Y. Furukawa, Fabrication of a Linear Motion Microsystem
on a Si Wafer, Int. J. Japan Soc. Prec. Eng., 30, 2, 1996, pp.168-169.
- 青木 立,古川勇二,諸貫信行, 高速・高精度制御実現のための制御アルゴリズムに関する研究(第1報),精密工学会誌,62,3,1996,pp.398-402.
- 諸貫信行,マイクロ機構の動的計測手法,日本ロボット学会誌,14,8,1996,pp.1109-1112.
- N. Moronuki, Y. Liang, Y. Furukawa, Experiments on the effect of material
properties on microcutting processes, Precision Engineering, 16, 2, 1994,
pp.124-131.
- Y. Liang, N. Moronuki, Y. Furukawa, Calculation of the effect of material
anisotropy on microcutting processes, Precision Engineering, 16, 2, 1994,pp.132-138.
- N. Moronuki, K. H. Lee, Y. Yura, Y. Furukawa, Design of Intelligent Machine
-Distribution of Knowledge and Control-, Advancement of Intelligent Production,
JSPE, Elsevier, 1994, pp.39-44.
- 諸貫信行,摩擦駆動機構の超精密機械への応用,精密工学会誌,57,10,1991,pp.1722-1725.
- Y. Furukawa, N. Moronuki, Design Procedure of Intelligent Machines and
its Application to AGV, Annals of CIRP, 40, 1, 1991, pp.119-122.
- 諸貫信行,古川勇二,久保博義,空気静圧軸受の利用による超精密案内面の設計と評価,精密工学会誌,55,5,1989, pp.908-913.
- Y. Furukawa, N. Moronuki, Effect of Material Properties in Ultra Precise
Cutting Processes, Annals of CIRP, 37, 1, 1988, pp.113-116.
- 諸貫信行,古川勇二,摩擦伝動による精密送り機構に関する研究,精密工学会誌,54,11,1988, pp.2113-2118.
- 諸貫信行,古川勇二,面絞り方式空気静圧案内面の設計と試作,精密工学会誌,54,4,1988, pp.721-725.
- Y. Furukawa, N. Moronuki, Contact Deformation of Machine Tool Slideway
and Its Effect on Machining Accuracy, JSME International Journal, 30, 263,
1987, pp.868-874.
- 古川勇二,諸貫信行,工作機械しゅう動面の接触変形と加工誤差,日本機械学会論文集C,53,485,1987, pp228-234.
- Y. Furukawa, N. Moronuki, K. Kitagawa, Development of Ultra Precision Machine
Tool Made of Ceramics, Annals of CIRP, 35, 1, 1986, pp.279-282.
- Y. Furukawa, N. Moronuki, H. Kubo, Application of a Ceramics Guideway in
an Ultra Precision Machine Tool, Bull. of JSPE, 20, 3,1986, pp.197-198.
|
|