OGATA LAB.                                  Tokyo Metropolitan University 本文へジャンプ
研究業績

・Hinata Maeno, Satoshi Ogata, Tetsuhide Shimizu, Ming Yang, Enhancement of Molecular Transport into Film Stacked Structures for Micro-Immunoassay by Unsteady Rotation, Micromachines 14(4) 744 (2023)
・Satoshi Ogata, Yuichirou Murata, Disinfection of Escherichia coli by Mixing with Bulk Ultrafine Bubble Solutions, Fluids 7(12) 383 (2022)
・Kosuke Sugimoto, Satoshi Ogata, Highly responsive multi-flow pattern generation by multi-electrode plasma actuator using a single power supply, Journal of Physics D: Applied Physics, 55 105201 , Nov 23, (2021)
・小方聡,分散系のレオロジー,分担執筆 第4章第1節 ファインバブルのレオロジー,エヌ・ティ・エス,(2021)
・ナノ粒子懸濁液による摩擦抵抗低減,境界層の摩擦抵抗低減技術,ながれ40(2021) pp. 260-263
・Satoshi OGATA and Ryo NAKANISHI, Effect of Surface Textures and Wettability on Droplet Impact on a Heated Surface, Processes 2021, 9(2), 350; DOI:10.3390/pr9020350.
・Keizo WATANABE and Satoshi OGATA, Drag reduction of aqueous suspensions of fine solid matter in pipe flows, AIChE Journal, (2021-2), DOI: 10.1002/aic.17241.
・小方 聡,仁科 勇太,栃木 弘,渡辺 敬三,酸化グラフェンナノシート懸濁液による抵抗減少効果と熱伝達特性,日本機械学会論文集,Vol. 86, No. 885 (2020), DOI:10.1299/transjsme.20-00047.
・Satoshi OGATA, Takuya KUBO, Flow characteristics of drag-reducing natural bamboo fiber suspensions with minimal environmental load, TAPPI Journal, 2019 Vol. 18, pp. 559-566
・Ken Yamamato, Masahiro Motosuke, Satoshi Ogata, Initiation of the Worthington jet on the droplet impact, Applied Physics Letters, 093701 (2018); https://doi.org/10.1063/1.5020085
・Yanuar, Gunawan, Waskito, K.T., Ogata, S., Effect of agar jelly coating in rectangular pipe to flow drag reduction, Journal of Applied Fluid Mechanics, Volume 10, Issue 4, 2017, Pages 1161-1166, DOI: 10.18869/acadpub.jafm.73.241.26701
・R. Osada, S. Ogata, T. Segawa, Characteristics of Ozone Generated from Dielectric Barrier Discharge Plasma Actuators, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering Vol:11, No:3, (2017)
・山本 憲,廣瀬 雄哉,武澤 英之,小方 聡, 気泡トラップによるマイクロチャネル内スリップ流形成過程の可視化, 日本機械学会論文集, Vol. 82, No. 841 [DOI:10.1299/transjsme.16-00164](2016-9)
・Ken Yamamato, Hideyuki Takezawa and Satosi Ogata, Droplet impact on textured surfaces composed of commercial stainless razor blades, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Volume 506, (2016-8), pp. 363–370
・萩原浩貴, 小方 聡, 草野浩俊, 瀬川武彦, 表面微細電極構造を有するDBDプラズマアクチュエータの誘起噴流特性に関する実験的研究, 日本機械学会論文集, Vol. 82, No. 838 [DOI:10.1299/transjsme.16-00068](2016-5)
・小方 聡, 宮城惇矢, 局 隆史, 希薄高分子水溶液のマイクロチャネル流れに及ぼす表面粗さの影響, 日本レオロジー学会誌,Vol. 44, No. 3, (2016-6)
・Satoshi Ogata, Gunawan, Jun Warashina, and Yanuar, Drag Reduction of a Pipe Flow Using Nata de Coco Suspensions, Advances in Mechanical Engineering, Vol. 2014 (2014), Article ID 651260.
・Ken Yamamato and Satosi OGATA, Drag reduction of slug flows in microchannels by modifying the size of T-junctions, International Journal of Multiphase Flow, Vol. 62,(2014-6), pp. 67–72
・Ken Yamamato and Satosi OGATA, Control of the bubble departure diameter by saw-tooth surfaces, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 460, 2014-10, pp. 377-385
・Ken Yamamato and Satosi OGATA, Effects of the velocity fluctuations on two-phase pressure drop in microchannels, Transaction on Control and Mechanical Systems, Vol. 2 , No. 4 (2013)
・中村 大吾,栃木 弘,小方 聡,渡辺 敬三, 界面活性剤水溶液の抵抗減少効果に関する研究(溶媒や添加剤が円管内流動に及ぼす影響), 日本機械学会論文集B編, Vol. 79, No. 801 (2013), pp. 879-887.
・Ken Yamamato and Satosi OGATA, Effects of T-junction size on bubble generation and flow instability for two-phase flows in circular microchannels, International Journal of Multiphase Flow, Volume 49, (2013), pp. 24–30
・Takehiko SEGAWA, Timothy JUKES, Tetsuhiko MAEDA, Satoshi OGATA and Shinya TAKEKAWA, Periodic Flow Separation Control around Windmill Blade by Plasma Actuator and FBG Sensor, Theoretical and Applied Mechanics Japan Vol.61 (2012), pp. 105-112.
・Satosi OGATA, Tetuya NUMAKAWA and Takuya KUBO, Drag reduction of bacterial cellulose suspensions, Advances in Mechanical EngineeringVolume 2011 (2011), Article ID 528373.
・Satoshi OGATA and Keigo SHIMIZU, Drag Reduction by Hydrophobic Microstructures, Journal of Environment and Engineering, Vol. 6, No. 2 (2011), pp.291-301.
・小方 聡,射越 悠,瀬川武彦, プラズマアクチュエータによる誘起流制御に関する研究(印加電圧特性が誘起流方向に及ぼす影響), 日本機械学会論文集B編, Vol. 77, No. 775 (2011), pp.672-679 .
・瀬川武彦, 小方 聡, 武川信也, DBDプラズマアクチュエータへの入力電圧波形が誘起噴流の流動特性に与える影響, ながれ, 第29巻, 第4号 (2010), pp. 251-258.
・小方 聡, 清水圭吾, 撥水性微細構造による抵抗減少効果に関する研究,日本機械学会論文集,75巻758号B編, (2009), pp. 1960-1966.
・Satoshi OGATA and Takeshi FUJITA, Effect of Surfactant Additives on Generation and Development of Laminar Boundary Layer on a Flat Plate, Journal of Fluid Science and Technology, Vol. 4, No. 3 (2009), pp. 558-566.
・Ming YANG, Satoshi OGATA, Arata KANEKO, Keisuke YAMOTO, Development of Micro Metallic Valve for mTASJournal of solid mechanics and materials, Vol.3, No.5 (2009), 729-738.
・渡辺 敬三, 小方 聡,バイオポリマーの抵抗減少効果に関する研究(麹菌を培養した水溶液の円管内圧力損失),日本機械学会論文集,75巻752号B編, (2009), 585 -589.
・小方 聡,神田 健介,小野塚 拓也,楊 明, エバネッセント光による壁面極近傍の流動測定に関する研究(高分子添加がマイクロチャンネル内流れに及ぼす影響),日本機械学会論文集, 74巻748号B編, (2008), 2452-2458.
・Ken YAMAMOTO and Satoshi OGATA, 3-D thermodynamic analysis of superhydrophobic surfaces, Journal of Colloid and Interface Science, Volume 326, Issue 2, (2008), 471-477.
・Kensuke KANDA, Satoshi OGATA, Kazuyoshi JINGU, and Ming YANG, Measurement of Particle distribution in Microchannel Flow Using 3D-TIRM Method, Journal of Visualization, Vol. 10, No. 2, (2007), pp. 207-216.
・Keizo WATANABE, Satoshi OGATA, Atushi HIROSE, and Akihiro KIMURA, Flow Characteristics of the Drag Reducing Solid Wall, Journal of Environment and Engineering, Vol. 2, No. 1 (2007), pp. 108-114.
・Keizo WATANABE, BUDIARSO, Satoshi OGATA, and Keigo UEMURA, Drag Reduction of an Enclosed Rotating Disk with Fine Spiral Grooves, Journal of Environment and Engineering, Vol. 2, No. 1 (2007), pp. 97-107.
・Satoshi OGATA, Asano KIMURA and Keizo WATANABE, Effect of Surfactant Additives on Centrifugal Pump Performance, Journal of Fluid Engineering, Transaction of the ASME, Volume 128, Issue 4, (2006), pp. 794-798.
・渡辺 敬三,平尾 宗彦,小方 聡, 希薄高分子水溶液の微小管路内流れに関する研究, 日本機械学会論文集, 72巻714号B編, (2006), pp. 331-336.
・渡辺 敬三, 小方 聡, 田口 悠介,円板摩擦ポンプに関する研究‐微細溝付きローターによる性能改善‐,日本工業出版,ターボ機械, Vol. 34, No. 2, (2006), pp. 1-6.
・Satoshi OGATA, Yoshihisa OSANO and Keizo WATANABE, Effect of Surfactant Solutions on the Drag and the Flow Pattern of a Circular Cylinder, AIChE Journal, Volume 52, Issue 1 (2006), pp. 49-57
・Keizo WATANABE, Syu SUMIO, and Satoshi OGATA, Formation of Taylor Vortex Flow of Polymer Solutions, Journal of Fluid Engineering, Transaction of the ASME, Vol. 128, (2006), pp. 95-100.
・渡辺 敬三,Budiarso,小方 聡,上村圭吾, 表面に螺旋溝を有する回転円板の摩擦抵抗低減, 日本機械学会論文集, 71巻712号B編, (2005), pp. 2849-2855.
・渡辺敬三, 小方 聡, 廣瀬 敦,木村彰宏, 抵抗減少効果を生ずる機能性壁面の流動特性に関する研究, 日本機械学会論文集, 71巻712号B編, (2005), pp. 2843–2848.
・小方 聡, 小佐野 芳寿, 渡辺 敬三, 界面活性剤水溶液の円柱周りの流れ(円柱抗力とフローパターンに及ぼす界面活性剤添加の影響),
日本機械学会論文集, 71巻710号B編, (2005), pp. 2414 –2420.
・Keizo WATANABE, Tsukasa TAKAYAMA and Satoshi OGATA, Instability of Surfactant Solution Flow in a Taylor Cell,
Journal of Visualization, Vol. 7, No. 4, (2004), pp. 273-280.
・小方 聡, 渡辺敬三, 界面活性剤水溶液中の円柱の抵抗減少効果に関する研究, 日本機械学会論文集, 69巻687号B編, (2003), pp.2424-2430
・Keizo WATANABE, Tsukasa TAKAYAMA, Satoshi OGATA and Seiji ISOZAKI, Flow between Two Coaxial Rotating Cylinders with Highly Water-Repellent Wall, AIChE Journal, Vol. 49, No. 8, (2003), pp. 1956-1963.
・Keizo WATANABE, Tsukasa TAKAYAMA and Satoshi OGATA, Formation Process of Taylor Cells, International Journal of Visualization, Vol. 5, No.3, (2002), pp.209-217
・Satoshi OGATA and Keizo WATANABE, Limiting Maximum Drag Reduction Asymptote for a Moment Coefficient of a Rotating Disk in Drag-Reducing Surfactant Solution, Journal of Fluid Mechanics, Vol. 457, (2002), pp.325-337
・小方 聡, 渡辺敬三, 界面活性剤水溶液による回転円板摩擦抵抗の低減, 日本機械学会論文集, 66巻651号B編, (2000), pp.2899-2904
・小方 聡, 渡辺敬三, 容器内超はっ水性回転円板の摩擦抵抗特性, 日本機械学会論文集, 65巻635号B編, (1999), pp.2391-2397
・Keizo WATANABE and Satoshi OGATA, Drag Reduction for a Rotating Disk with Highly Water-repellent Wall, JSME International Journal, Vol. 41, No. 3, B, (1998), pp.556-560
・渡辺敬三, 小方 聡, 超はっ水性回転円板のニュートン流体における摩擦抵抗の低減について, 日本機械学会論文集, 63巻612号B編, (1997), pp.2752-2756

特許
・特願2016-056276, 微小気泡発生板
・特開2014-49428, プラズマアクチュエータ
・特願2012-51070, 抵抗低減剤及び流体制御法
・特開2011-238385, 誘起流制御表面プラズマアクチュエータ